SERAPHVantageGet the beta

Your hardware.
A clearer connection.

Know what connects, what’s supported,
and where the boundaries are.

Find your platform.

Capability overview based on the current Vantage reference.

MAVLinkIncluded

ArduPilot

Bench telemetry and supported reviewed settings.

Automatic flight-controller firmware flashing is not included.
MAVLinkIncluded

PX4

Bench telemetry and supported reviewed settings.

Exact board and firmware revisions require release-specific verification.
MSPReadings only

Betaflight

Native read-only controller telemetry.

Configuration, firmware flashing and pilot output are not included.
Board pluginSetup required

Arduino

Selected AVR, megaAVR, Uno R4, SAMD, Nano BLE, GIGA and Portenta cores.

Choose an exact supported model; review the firmware build and upload.
Board pluginSetup required

Raspberry Pi Pico

Selected RP2040 and RP2350 board toolchains.

Plugin installation prepares tools; it does not install firmware silently.
Board pluginSetup required

Espressif ESP32

Selected ESP32 board toolchains and reviewed uploads.

Board model, connection identity and a firmware review are required.

6 platforms shown

Clear about what “compatible” means.

Protocol support does not certify every board or firmware version. The reference verification uses protocol fixtures and real compiler builds; physical-board flashing and recovery were not verified. A release-specific tested firmware and board matrix is still to be published.

Will Vantage flash my flight controller?

Automatic ArduPilot, PX4 and Betaflight flight-controller flashing is not implemented. Board-plugin workflows support selected Arduino, Pico and ESP32 builds and explicitly reviewed uploads.

Are closed vendor flight links supported?

Closed vendor flight links are not supported until a working Vantage integration is available. Installing a vendor SDK alone does not establish support.

Does detection identify every component?

Detection uses reported firmware identities and local device descriptors. Shared USB bridges cannot reliably establish an exact board model. Unsupported or ambiguous devices retain clear status and setup guidance.